ElMetro company carries out verification and calibration of import and domestic flowmeters and liquid meters as well as provides services on arranging verification and calibration process (view Pic. 1).
Flow measuring verification stand RU-100V (hereinafter referred to as “RU” or “RU-100V”) with limit of main relative error ±0.05% and flow ranges from 0.1 to 100 m3/h which is intended for verification, calibration and testing of flowmeters and liquid meters could be applied.
Our company fulfills verification and calibration of videographic recorders, input and output modules, technical measuring instruments, calibrators of electric signals and pressure and other devices of domestic and import production on basis of an electrical measurements laboratory and a metrology laboratory (view Pic. 2).
To initiate verification a customer should send a letter to ElMetro Metrology service which would be written in free form and contain following information:
letter number and date of issue;
device name and model;
serial number of the device;
company’s legal information;
other additional information.
Such letter should be sent to our e-mail address: firstname.lastname@example.org (or email@example.com). If you would like to get a more detailed consultation on verification and calibration, please, contact us by tel.: +7 (351) 220-06-01. Once we receive your letter, ElMetro specialists will contact you and provide guidance required to send us device for verification.
In order to guarantee proper verification or calibration, please, send us device with its full supply package. Before shipping the device, please, get acquainted with requirements to supply package, outside appearance, transportation packing and etc. pointed out in manual instruction. In case a customer fails to fulfill the conditions, ElMetro company reserves the right not to accept such instruments for verification or calibration.
Conditions of performing verification or calibration:
flowmeters and liquid meters are accepted for verification (calibration) in good working condition, with full supply package in accordance to manual instruction or product certificate including verification procedure description and certificate of the previous verification;
after initial examination customer is provided with a bill and once it is paid ElMetro specialists start verification (calibration);
average time to verify a device is from 7 to 10 days;
all unforeseen cases are discussed and agreed with a customer individually.
ElMetro company provides services on preparation of flowmeters and liquid meters for verification (for example, decontamination of flowmeter flow tubes).
In order to find out more details, please, contact our sales department by tel. +7 (351) 220-06-01, our technical support by tel. +7 (351) 742-68-84 or send us an e-mail: firstname.lastname@example.org, email@example.com.