-
Multifunctional calibrator ElMetro-Pascal-03
-
Reference pressure transmitters ElMetro-Pascal-04
Reference pressure transmitters ElMetro-Pascal-04 are designed to measure and convert excess pressure, negative pressure, absolute pressure of liquids and gases into a digital output signal. Reference pressure transducers ELMETRO-Pascal-04, Pascal-04 correspond to the level of the working standard of the 2nd, 3rd category according to GOST R 8.840-2013, the level of the working standard of the 1st, 2nd, 3rd category according to the state calibration scheme for measuring instruments of excess pressure up to 4000 MPa, approved by Order No. 1339 of June 29, 2018 and GOST R 8.802-2012, the level of the working standard of the 2nd category according to GOST 8.187-76.
-
Pneumatic pressure calibrator ElMetro-Pascal-05
The pneumatic pressure calibrator ELMETRO-Pascal-05 (hereinafter referred to as the calibrator) is designed to accurately reproduce the unit of pressure.
Calibrator of accuracy classes 0.01; 0.015; 0.02 is used as a working pressure standard for verification, calibration and calibration of pressure measuring instruments in calibration laboratories of state metrological services, metrological services of legal entities and at industrial enterprises that produce and operate pressure measuring instruments.
-
Calibrator multipurpose portable Elmetro-PKM
-
Pressure calibrator-controller ElMetro-Pascal
Pressure calibrator-controller ElMetro-Pascal combines functions of high-precision manometer and accurate pressure controller. It is intended for accurate reproduction and measurement of pressure (vacuum) in a wide range (up to 3.5 MPa). The calibrator-controller is applied as a reference instrument for verification of pressure gauges, manometers and other pressure measuring instruments. It is also applied in high-efficient metrology stands for adjustment and calibration of pressure measuring instruments during their mass production, as well as in large calibration laboratories. ElMetro-Pascal is a replacement for traditional deadweight manometers and pneumatic pressure calibrators.
-
Software package ARM-Pascal
-
Multichannel high-precision multimeter ElMetro-Kelvin
Multichannel high-precision multimeter ElMetro-Kelvin is intended for measuring DC voltage and current load, resistance, output signals of thermo-electric converters and resistance temperature detectors.
Multimeters are applied for verification and calibration of TP and RTM temperature sensors with unified output signals in accordance to GOST 26.011-80 as well as for other types of sensors and/or transducers with output signals in accordance to GOST 26.011-80. Individual graduation characteristics of reference temperature sensors could be input during verification of temperature sensors. Multimeter enables verification of coupled RTD for heat meters. Multimeter could be used for certification of thermostats temperature patterns and technological equipment such as drying ovens, thermal chambers and furnaces.
-
Multifunctional calibrator ElMetro-Volta
Multifunctional calibrator ElMetro-Volta is intended for high-precision measurement and reproduction of direct current and voltage as well as resistance and signals of thermo-electric converters – thermal couples (TC) and resistance temperature detectors (RTD).
Calibrators are applied both in the field and in laboratories as an operable and a reference measuring instrument for verification, calibration and adjustment of various measuring and measuring & computing complexes, normalizing and primary transducers as well as indicating and recording devices.
-
ElMetro brand pressure sources
-
ElMetro-EKD
Pneumatic power supply system ElMetro-EKD (hereinafter - SPP) is designed to supply pneumatic networks and devices with compressed air of pollution class 1 according to GOST 17433-80. It is used to power:
- Pressure calibrator-controllers ElMetro-Pascal, Vozduh, PACE 5000, DPI515, PPC4, WIKA CPC6000, CPC8000;
- pressure sensor characterization installations;
- gas deadweight gauge, etc.
-
Air-preparation unit ElMetro-BPV
Air-preparation unit ElMetro-BPV is used for additional purification and dehumidification of air used to supply pressure reference units, such as Pressure calibrator-controllers ElMetro-Pascal, PACE 5000, PPC4, series calibrators Vozduh, gas piston pressure gauges, etc.
It performs the functions of protecting controllers and pressure reference units from contaminants falling from the cavity of device under the test. It allows preventing breakage of pressure controllers.